Nissan R35 GTR – HKS ATSC Active Torque Split Computer
£416.67 Ex.Vat | £500.00 Inc.VAT
SKU# 117204 | 45006-AN002
In good used and working condition, please refer to photos.
The 4WD system on the R35 GT-R is electronically controlled. The front torque distribution is determined by driving conditions. ATSC corrects the front torque distribution for optimal driving.
ATSC can operate at 4 different levels. The user can easily identify the profile through the flashing LED light and select between them through the use of a switch.
Features:
- Oversteer can occur during high load driving due to lack of front torque. ATSC can optimise this for improved high load stability.
- Proper torque distribution can optimise full use of the engines power output. Therefore, ATSC is recommended for use on vehicles with GT570/600/800 specifications or similar.
- Installation is made simple with the plug and play harness which can connect and disconnect easily to the E-TS unit under the driver’s seat. Installation time is approximately 2 Hours.
- ATSC is active when vehicle speed is above 50km/h and when the brake is not applied. Therefore, it will not lead to instability from standing start or during low speed driving.
*Additional infomation down below
For more details or photos please don’t hesitate to contact us, email: sales@japperformanceparts.co.uk or phone: 01293 520090, or better yet why not come down and visit us at our site in Crawley, open weekdays 9:00am-6:00pm and Saturdays 9:00am-2:00pm.
Only 1 left in stock
Description
- The 4WD system of the R35 GT-R is electronically controlled. The front torque distribution is controlled by the drive condition. ATSC is the device to control the front torque distribution to be an appropriate level.
- Front torque distribution is available in 4 levels.
Just press a switch to change the setting level.
The number of the LED blinking represents the setting level.
* Discontinued.
Features
- Oversteering during a high load driving can be overcame.
Therefore, stable driving under high load is possible. - Recommended for a highly tuned vehicle (GT800SPEC / GT600PACKAGE / GT570PACKAGE)
Proper torque distribution can optimize the engine performance. - Simple installation.
- ATSC controls the torque when the speed goes beyond 50km/h without applying a brake. It won’t lead instability at start or during a low speed driving.
Performance
Fuji Speedway 100R Drive Test
Parts
- Coupler-ON Harness
- Main Unit
- ON/OFF Switch
Confirmed car
| Vehicle | Type | Engine | Year | Remarks |
|---|---|---|---|---|
| GT-R | R35 | VR38DETT | 07/12- |
Installation
Install the main unit to the E-TS Unit underneath the driver’s seat using the Coupler-ON Harness.
Required installation time is approximately 2 hours.